CUTEK®
Mason’s Mill & Lumber stocks the complete CUTEK® system — CUTEK® Extreme clear oil, CUTEK® Colortones, cleaners and applicators — plus CUTEK® pre-finished wood milled right here in-house.
Wood protection, passed down through generations
CUTEK® loves the look and feel of wood, and sets out to provide the best wood protection solutions on the market. The company is passionate about the sustainability of the lumber industry — without wood, there would be no need for wood oils.
As a family business passed down through generations, CUTEK® is committed to helping the lumber industry thrive for generations to come.
Browse CUTEK®
The CUTEK® system is built around two simple steps: Prepare and Protect. Start with CUTEK® Wood Stripper and/or CUTEK® Wood Reviver to get your wood clean and ready. Then protect it with CUTEK® Extreme clear oil, adding a CUTEK® Colortone to maintain or change the color. Then maintenance is as easy as a wash with CUTEK® Quickclean and a re-coat with CUTEK® Extreme, no sanding required.
DeckWise® Deck Cleaner Parts 1/A & 2/B
Wood traps dirt, pollen and grime and when using exotic hardwood lumber it pays to maintain it. The Part 1 cleaner eliminates mildew, dirt, mold and stubborn stains. It also removes graying and reconditions Ipe, Tigerwood, Cumaru, Redwood, Cedar decking and outdoor wooden furniture or hardwood siding. Rejuvenate the rich color and distinct wood grain patterns and restore the all-natural lavish color before properly refinishing. The concentrated powders are developed to clean external hardwood decks, fences, hardwood siding, wood railings, benches, chairs and other outside wooden objects.
The Cleaner Part 1 is an oxygen rich wood cleaner that contains no bleach. When you follow the instructions on the Deck and Wood Cleaner label, the product is safe to use and will not damage wood, vegetation or lawn and is bio-degradable. Do not use a power washer on hardwood lumber which could leave scars and raise the wood grain. Always scrub with a non-metal brush. Wood cleansers can easily increase the pH level of lumber. Always follow cleaning with the DeckWise® Deck and Wood Brightener Part 2.
DeckWise® Deck Cleaner & Brightener Part 2 restores the pH level back a neutral state. It also removes tough rust and tannin stains caused by leaves, as well as mold and fungi stains while brightening the hardwood for finishing. It is recommended for use on most species of hardwood, including Redwood, Ipe, Cedar, Cumaru, Tigerwood and thermally modified softwoods. Brighten and restore the all-natural allure of outdoor wooden decking and rainscreen wood siding, outdoor furniture, hardwood fences, wood railings and steps. The goal of our product is to prepare the wood after cleaning and to eliminate the caustic affect from the Cleaner. The Brightener Part 2 is an oxygen-rich formula that contains the ingredient Oxalic Acid. It is a pH neutralizer and will re-establish the pH level to the wood.
Once the wood pH is neutral, the wood is ready to accept your choice of stain or oil finish more evenly and will certainly improve the beauty of the wood. We recommend our Ipe Oil Hardwood Oil Finish. The brightener also prepares new wood by stripping mill glaze. It can be used to eliminate rusty areas on concrete, brick and masonry as well. The Brightener Part 2 is a powder concentrate offered in 16 oz. jars. Mix at a 4:1 ratio with warm water. For tougher jobs, you may require several applications or a more powerful mixture.
Quote
Learn More About CUTEK®
See CUTEK® in action. These short videos show how the CUTEK® 2-step system works, from preparing your wood to applying CUTEK® Extreme clear oil and CUTEK® Colortones, so you can take on your project with confidence.
Ask about Mason's Mill CUTEK® Pre-Finished Wood! Contact us for a free quote!
Retain Your Wood's Color
With CUTEK® Colortones you can enhance and maintain the natural beauty of your wood, or alter the color to meet the design requirements of your project. Colortone swatches are shown below in groups of Brown Hues, Red Hues, Yellow Hues and White/Black Hues.
Shop CUTEK® Samples
Revive, Strip or Clean Stained& Weathered Wood to Original Appearance
With the CUTEK® Wood Reviver, Wood Stripper and Quickclean products, you can brighten, clean and restore wood to look like new and prepare for CUTEK® Extreme with CUTEK® Colortone Pre-Mixed Stains. These powerful yet safe CUTEK® wood enhancing products are user-friendly, DIY-friendly and no professional experience is necessary. – CUTEK® needs to be added before the name of each of our products.
Frequently Asked Questions
Traditional varnishes and many "penetrating" oils form a film on the surface of the wood. Over time, UV rays and wood movement break down that film, causing it to flake or peel and letting water in, which leads to cupping, warping, splitting and rot. CUTEK® Extreme clear oil is a true penetrating oil. It diffuses deep into the wood and drives moisture out from the inside. Its protective components stay permanently mobile in the wood, migrating to any cut or fastener hole and sealing it against moisture. This "self-healing" effect is what makes CUTEK® the professional's choice for long-term wood protection.
Step 1 – Prepare: Clean and enhance your wood with CUTEK® Wood Reviver, CUTEK® Wood Stripper or CUTEK® Quickclean. Step 2 – Protect: Apply CUTEK® Extreme clear oil, with a CUTEK® Colortone added if you want to hold or change the color of your wood.
No. CUTEK® Extreme will not peel or flake. Over time, wood exposed to the sun will fade and a CUTEK® Colortone can wear with use. When that happens, simply clean and apply a maintenance coat — no sanding or stripping required.
Yes. CUTEK® Extreme stabilizes wood by controlling the free exchange of moisture between the wood and the environment. Because it stays mobile and self-healing, that protection continues even when the wood is cut or fastened, improving dimensional stability and extending service life.
Yes. Each additional coat of CUTEK® Extreme adds more protection against moisture. The more consistently you maintain your wood with CUTEK® Extreme, the better protected it becomes.
No. CUTEK® Extreme must be applied to bare, clean and dry wood. Existing stains, paints, linseed oil, polyurethane and water-based finishes block penetration and must be fully removed first with CUTEK® Wood Stripper followed by CUTEK® Wood Reviver, or by machine sanding.
CUTEK® Extreme can be applied to new wood without preparation. For the best results — and especially if you're adding a CUTEK® Colortone — we recommend CUTEK® Wood Reviver first to clean the surface, open the grain and remove tannins, mill glaze and other stains.
Use CUTEK® Wood Reviver. It removes the grey and brings back the original color and grain of your wood before you apply CUTEK® Extreme.
Clean it with CUTEK® Quickclean to remove dirt, grease and grime, then recoat. If maintenance has been neglected and the wood has greyed or become heavily stained, use CUTEK® Wood Reviver before recoating.
Stir CUTEK® Extreme thoroughly from the bottom of the can (with your CUTEK® Colortone mixed in, if using) before and during use. Apply thin, even coats with a brush or paint pad applicator. Two or three thin coats are much better than one or two thick coats.
Yes. Wood coated with clear CUTEK® Extreme can be installed immediately or block stacked wet for later use. We don't recommend wet stacking wood coated with a Colortoned CUTEK® Extreme, as it may create an uneven, smudged finish.
Request a CUTEK Quote
Use the form below to contact our sales team and start your next CUTEK project today.