Our plywood inventory supports builders and cabinetry makers with dependable stock, clean faces, and flexible core options. Standard panels, custom layups, and specialty sheet goods—sourced to meet the demands of construction and production environments.
At Mason’s Mill & Lumber, plywood isn’t an afterthought — it’s a working material. We stock and source sheet goods that builders and cabinetry makers rely on every day, with the consistency, face quality, and core options required for real jobsite and shop conditions.
From domestic NAUF and ULEF panels to specialty outdoor and moisture-resistant options, our inventory is built to support production schedules, not slow them down.
For projects that need more than an off-the-rack panel, we offer custom plywood solutions through our sourcing and manufacturing partners.
Custom capabilities include:
Custom veneer layups
Different faces on each side (species-to-species or veneer to melamine)
Pre-finished custom panels
Cut-to-size options (within project scope)
These solutions are typically handled job-by-job, allowing builders and cabinet shops to dial in exactly what the project requires — without over-ordering or unnecessary compromises.
If your project needs something specific, our team can help spec the panel before it ever shows up onsite.
Reddish brown with small pores and an even fine straight grain. Great for cabinets, furniture or other interior projects such as shelving and paneling. Can be primed, painted, sealed and stained.
We carry aromatic cedar plywood in a 1/4″ thickness. This plywood is available in a veneer core.
In rustic or knotty grades of lumber, there will be a percentage of degrade during the milling process. Some knots may shake lose and/or fall out during the milling process. Mason’s Mill is not liable for these defects in moldings produced from knotty grades of lumber.
Mason’s Mill and Lumber will not be responsible or issue a credit for any cup, warp, twist or splitting that occurs in any custom cut Fir or Cedar boards or beams. These issues can be present in material cut from larger beams and timbers and need to be accounted for by the buyer when determining if Fir or Cedar is appropriate for the intended application. Cedar and Fir products will typically have knots.
Bending plywood is a bendable plywood used for the facing of interior doors, for the backing of wood and faux-wood paneling, for the interior walls of truck bodies, RVs and trailers, shipping containers, sub-flooring, movie and theatre set construction, cabinet interiors and backing, furniture backing and drawers, picture frame backing and crafts.
Beaded look adds charm and a custom look to any room. Pre-finished surface allows the panel to be installed as is, or it may be painted to match decor.
Easy-to-use and install.
We carry cherry plywood in a variety of grades and sizes, including 1/4″ and 3/4″ thickness.
This plywood is available in a Veneer Core (VC), CFC (Combination Fiber Core), and a MDFC (Medium Density Fiber Core) in 4×8 sizing.
We carry Cypress Plywood in a variety of grades and sizes, including 3/4″ and 1/4″ thickness. This plywood is available in a Veneer Core, Offered in 4×8 sizing.
A narrow strip of material used to create durable and aesthetically pleasing trim edges when finishing carpentry. Edge banding is used to cover the exposed sides of materials such as plywood, particle board or MDF, increasing durability and giving the appearance of a solid or more valuable material.
Edge banding can be made of different materials including PVC, ABS, acrylic, melamine, wood or wood veneer and use various types of adhesives and glues for attachment.
Available in: Alder, Ash, Cherry, Mahogany, Maple, Red Oak, Rift & Quartered White Oak, Walnut, White Birch, White Oak & White Poly
FAU = FLEECE AUTOMATIC (NO GLUE)
PS = PEEL & STICK
FPG = FLEECE PREGLUED / IRON-ON
We carry hickory plywood in a variety of grades in 1/4″ and 3/4″ thickness. This plywood is available in a Veneer Core (VC) and CFC (Combination Fiber Core) in 4' × 8'.
Knotty alder plywood in a variety of grades and sizes, including 3/4″ and 1/4″ thickness. We specialize in carrying a custom-made premium rustic grade that offers the benefits of a high-end ply with the rustic look of true knotty alder.
Great for cabinets, furniture or other interior projects such as shelving and paneling. Can be primed, painted, sealed and stained.
In rustic or knotty grades of lumber, there will be a percentage of degrade during the milling process. Some knots may shake lose and/or fall out during the milling process. Mason’s Mill is not liable for these defects in moldings produced from knotty grades of lumber.
We carry knotty pine plywood in a variety of grades and sizes, including 3/4″ and 1/4″ thickness. This plywood is available in a Veneer Core and CFC (Combination Fiber Core) in 4×8 sizing.
In rustic or knotty grades of lumber, there will be a percentage of degrade during the milling process. Some knots may shake lose and/or fall out during the milling process. Mason’s Mill is not liable for these defects in moldings produced from knotty grades of lumber.
We carry mahogany plywood in a variety of grades and sizes, including 1/4″, 1/2″, and 3/4″ thickness. This plywood is available in a Veneer Core, CFC (Combination Fiber Core), and a MDFC (Medium Density Fiber Core) 4' × 8' imported and domestic.
We carry maple plywood in a variety of grades and sizes, including 1/4″, 3/8", 1/2″, 3/4″, thickness. This plywood is available in a Veneer Core, CFC (Combination Fiber Core), and a LMX (Lumber MDF Crossband) offered in an Import or Domestic.
This species is also offered as a GreenPly® product
We stock MDF (medium density fiber) plywood in 1/4" to 1" thickness. MDF finishes beautifully and consistently. Unlike many types of plywood, it's created by breaking down hardwood and softwood into wood fibers and then pressed together to create a solid piece. It's similar to particleboard, but is much stronger and denser with fewer gaps between the wood fibers.
Ask about our Pre-Finished Products!
We stock MDO (Medium Density Overlay) plywood in 3/4" in 4' x 8' size. MDO finishes beautifully and consistently. Good 2 sides.
MDO is made to be used in exterior applications and is created with waterproof glue.
Natural birch plywood is known for being a thin, but strong building material that can tackle a variety of projects.
We carry pre-finished birch drawer sides in Chinese birch and Russian birch in 1/2" thickness, and 5' and 8' lengths. These pre-finished drawer sides are pre-cut components that are ready to be installed in your drawer project, or can be cut down as needed.
Quarter sawn is a term that refers to the visual characteristics of the face of each board. The lumber is quarter sawn for the best grain rather than the highest grade. Our quarter sawn white oak is available in 1/4" and 3/4" thickness and 4' x 8' sizing.
We carry red oak plywood in a variety of grades and sizes in 1/4″, 1/2″ and 3/4″ thickness. This plywood is available in a Veneer Core (VC) and CFC (Combination Fiber Core) in 4' × 8'.
We carry rift white oak plywood in 1/4″ and 3/4″ thickness. This plywood is available in a Veneer Core (VC), Combination Fiber Core (CFC) in 4' × 8' and 4' x 10' sizing.
This species is also offered as a GreenPly® product
*Please submit an email inquiry for market pricing and availability on specific sizes.*
We carry Russian birch plywood in a variety of grades and size. This plywood is available in a (5' x 5') or (4' x 8') sizing.
We carry rustic oak plywood in 1/4″ and 3/4″ thickness. This plywood is available in a Veneer Core (VC) and Combination Fiber Core (CFC), in 4' × 8'.
We carry Superior Alder Plywood in a variety of grades and sizes, including 3/4″ and 1/4″ thickness. This plywood is available in a Veneer Core and a CFC (Combination Fiber Core)
This species is also offered as a GreenPly® product
Tricoya® is a completely new, high performance MDF panel product. It demonstrates outstanding durability and dimensional stability in the most extreme and challenging environments – both exterior as well as interior, wet and high moisture applications. The product uses proprietary acetylated wood technology and a modified MDF manufacturing process to create a wood panel product with outstanding durability and stability.
To learn more about Tricoya® CLICK HERE
Ask about our Pre-Finished Products!
We carry walnut plywood in a variety of grades and sizes, including 1/4″ and 3/4″ thickness. This plywood is available in a Veneer Core (VC), Combination Fiber Core (CFC), and a Medium Density Fiber Core (MDFC) in 4' × 8' sizing.
This species is also offered as a GreenPly® product
We carry white ash plywood in a variety of grades and sizes, including 3/4″ and 1/4″ thickness. This plywood is available in a Veneer Core and a CFC (Combination Fiber Core).
White birch plywood is known for being a thin, but strong building material that can tackle a variety of projects.
We carry white oak plywood in a variety of grades and sizes, including 1/4″ to 3/4″ thickness. This plywood is available in a Veneer Core (VC), Combination Fiber Core (CFC), in 4' × 8' and 4' x 10' sizing.
This species is also offered as a GreenPly® product
We offer a deep selection of domestic and imported plywood, available in a wide range of species, cores, and thicknesses — typically from 1/4″ through 1″, with larger and specialty thicknesses available by request.
Available options include:
NAUF panels
ULEF certified plywood
MDF core and combination core stain-grade panels
MDF sheets from 1/4″ to 1-1/8″
MDO for exterior and formwork applications
Every product we stock is selected with flatness, consistency, and finish quality in mind — the things that matter once the sheet hits the saw or goes on the wall.
We carry a wide range of domestic and imported plywood, including NAUF panels, ULEF-certified plywood, MDF core, combination core, MDO, and specialty sheet goods. Thicknesses typically range from 1/4″ to 1″, with additional options available by request.
Yes. We can source custom plywood layups on a project-by-project basis. Options include custom veneers, different faces on each side, melamine on one face with wood veneer on the other, and pre-finished panels depending on project requirements.
Cut-to-size services are available within reason and are typically handled as part of a larger project or custom order. Our team can help determine what makes sense based on your application and timeline.
For exterior and moisture-exposed applications, we stock MDO panels, Tricoya™ waterproof MDF with a 50-year rot warranty, and Modern Mill ACRE™ sheet goods designed for durability and long-term performance outdoors.
Our plywood and sheet goods are primarily used by builders, cabinetry shops, and millwork professionals working in residential and commercial construction. We focus on materials that perform well in jobsite and shop environments where consistency and availability matter.
Let’s Spec It Right Whether you need stocked panels, a custom layup,
or help selecting the right sheet good for the job, our team is here to help.
