The CUTEK^® Wood Reviver, CUTEK^® Wood Stripper (formerly CUTEK^® CD33 Naked) and CUTEK^® Quickcleaner products are powerful and user-friendly. No professional experience is necessary. These CUTEK^® products can help restore stained, weathered and gray wood back to its original appearance.

CUTEK^® Wood Reviver is effective in removing stubborn stains caused by tannins, water, iron, resins, mold and fungus. It also removes the common invisible glaze (mill glaze) to prepare newly sawn or machined wood for coating. CUTEK^® Wood Reviver will brighten, clean and restore wood to look like new, ready for CUTEK^® Extreme. It can be used diluted or undiluted depending on the severity of staining and/or weathering.

CUTEK^® Wood Stripper is suitable for removing multiple layers of the most commonly used wood coatings such as latex paints, stains, varnishes, linseed oils, acrylics and other film forming coatings. It is also effective at removing coatings from metal, brick and masonry surfaces.

CUTEK^® Quickclean is the perfect way to regularly keep all your wood clean, and it prepares wood to optimize the performance of maintenance coats of CUTEK^® Extreme. It will easily remove dirt, grease and grime from your outside surfaces as well as even out CUTEK^® Colortone that has started to wear or erode unevenly on your wood.

Wood traps dirt, pollen and grime and when using exotic hardwood lumber it pays to maintain it. The Part 1 cleaner eliminates mildew, dirt, mold and stubborn stains. It also removes graying and reconditions Ipe, Tigerwood, Cumaru, Redwood, Cedar decking and outdoor wooden furniture or hardwood siding. Rejuvenate the rich color and distinct wood grain patterns and restore the all-natural lavish color before properly refinishing. The concentrated powders are developed to clean external hardwood decks, fences, hardwood siding, wood railings, benches, chairs and other outside wooden objects.

The Cleaner Part 1 is an oxygen rich wood cleaner that contains no bleach. When you follow the instructions on the Deck and Wood Cleaner label, the product is safe to use and will not damage wood, vegetation or lawn and is bio-degradable. Do not use a power washer on hardwood lumber which could leave scars and raise the wood grain. Always scrub with a non-metal brush. Wood cleansers can easily increase the pH level of lumber. Always follow cleaning with the DeckWise® Deck and Wood Brightener Part 2.

DeckWise® Deck Cleaner & Brightener Part 2 restores the pH level back a neutral state. It also removes tough rust and tannin stains caused by leaves, as well as mold and fungi stains while brightening the hardwood for finishing. It is recommended for use on most species of hardwood, including Redwood, Ipe, Cedar, Cumaru, Tigerwood and thermally modified softwoods. Brighten and restore the all-natural allure of outdoor wooden decking and rainscreen wood siding, outdoor furniture, hardwood fences, wood railings and steps. The goal of our product is to prepare the wood after cleaning and to eliminate the caustic affect from the Cleaner. The Brightener Part 2 is an oxygen-rich formula that contains the ingredient Oxalic Acid. It is a pH neutralizer and will re-establish the pH level to the wood.

Once the wood pH is neutral, the wood is ready to accept your choice of stain or oil finish more evenly and will certainly improve the beauty of the wood. We recommend our Ipe Oil Hardwood Oil Finish. The brightener also prepares new wood by stripping mill glaze. It can be used to eliminate rusty areas on concrete, brick and masonry as well. The Brightener Part 2 is a powder concentrate offered in 16 oz. jars. Mix at a 4:1 ratio with warm water. For tougher jobs, you may require several applications or a more powerful mixture.