Georgian Profiles
Georgian architecture ran from roughly 1700 to 1780 and remains the most enduring template for formal American homes — symmetrical facades, paneled doors, and richly layered interior trim. Georgian moulding is built up from multiple distinct elements: ogees, ovolos, beads, and fillets stacked into crown and cornice assemblies, with raised six- or eight-panel doors set into wide cased openings.
Browse Georgian Profiles
Mason’s Mill stocks 45 historically faithful Georgian profiles ready to run in any hardwood or softwood. These are the right starting point for any colonial-era restoration, formal study or library remodel, or new construction aiming for traditional New England, Mid-Atlantic, or Tidewater proportions.
Vertical Grain Pine — Cutek Extreme Clear Finish
Vertical Grain (VG) Pine is a premium cut of pine milled specifically so that the growth rings run perpendicular to the face of the board — typically at 60° to 90° to the surface. This "quartersawn" or "rift-sawn" orientation produces a board with a tight, straight, pinstripe-like grain pattern that is dramatically more stable and refined than standard flat-sawn (plain-sawn) pine. Because the growth rings are oriented vertically, VG boards resist the cupping, twisting, and cathedral-pattern grain shifts that flat-sawn lumber is prone to, and they wear more evenly over time — which is why vertical grain has been the traditional choice for high-end architectural applications like porch flooring, exterior siding, boat decks, and fine millwork.
The visual character of VG Pine is one of its biggest selling points: consistent, linear grain lines with minimal figure or knots, producing a clean, understated appearance that reads as more formal and architectural than character-grade pine. This makes it particularly well-suited to applications where the wood is a design feature rather than a background material — traditional porch ceilings, Craftsman and coastal-style siding, wainscoting, and interior paneling.
Each board is finished with Cutek Extreme Clear, a penetrating oil engineered to stabilize exterior wood from the inside out. Rather than forming a surface film like paint or varnish, Cutek carries its oils deep into the wood fibers, where they work continuously to slow moisture movement — the primary driver of cupping, checking, and end-splitting. This is especially valuable for pine, which is more naturally susceptible to moisture-related movement than denser hardwoods; Cutek's stabilizing action significantly extends the board's dimensional life outdoors. Because the finish penetrates rather than coats, it cannot peel or flake, and maintenance requires no sanding or stripping — just clean the surface and reapply when it looks dry. The clear formulation adds no pigment, allowing the natural honey-gold tone of the pine to show through initially before gradually silvering to a soft gray patina if left unmaintained with a colortone.
Ideal for porch ceilings, tongue-and-groove soffits, traditional lap or shiplap siding, wainscoting, interior paneling, and any application where a refined, straight-grained wood aesthetic is desired.
Specifications
| Spec | Detail |
|---|---|
| Species | Pine (typically Southern Yellow Pine, White Pine, or Radiata Pine depending on source) |
| Cut | Vertical Grain (VG) — quartersawn / rift-sawn |
| Grain Orientation | Growth rings at 60°–90° to the face; tight, straight, linear grain pattern |
| Grade | Clear or C & Better — minimal knots, uniform appearance |
| Finish | Cutek Extreme Clear (penetrating oil) |
| Finish Type | Oil-based, non-film-forming |
| Color | Natural honey-gold to warm amber (weathers to silver-gray if not maintained with colortone) |
| Janka Hardness | ~380–870 lbf depending on pine species |
| Dimensional Stability | Superior to flat-sawn pine — VG cut significantly reduces cupping, twisting, and radial movement |
| Wear Characteristics | Wears more evenly than flat-sawn; ideal for high-traffic and high-visibility applications |
| Applications | Porch ceilings, soffits, T&G siding, wainscoting, interior paneling, fine millwork, traditional and coastal architecture |
| Maintenance | Clean and re-oil with Cutek Extreme as needed — no sanding or stripping required |
| Fixings | Stainless steel or hot-dipped galvanized fasteners recommended for exterior applications |
| Sustainability | Sourced from managed pine forests; FSC-certified options available |
Quote
Request a Custom Profile or Quote
Contact Mason’s Mill to start your custom Moulding or Profile order.