Interior Rough Lumber

ACRE™ recycled rice hull/pvc composite is made 100% in America (Mississippi) does not rot, is water resistant and has an extremely long life and can be stained or painted. ACRE™ can be used interior or exterior and is safe and non-toxic.

Not only is ACRE™ a sustainable, low-maintenance alternative to wood, it’s also a pleasure to work with on the jobsite. It’s lightweight and easy to carry, yet every piece is strong, rigid and straight. ACRE™ is also easy to cut with ordinary woodworking tools—with no special equipment, training or experience—and waste is minimal. And it takes paint, stain and lacquer just like real wood. Once your project is complete, you can be confident ACRE™ will stand up to water, weather, fire, pests and UV for years to come, backed by an industry-leading materials guarantee.

We are stocking both ACRE™ dimensional boards in various sizes. The boards are reversible with one smooth side and one embossed wood grain side.

Regarded as excellent in resistance to both decay and insect attack, aromatic red cedar is frequently used for fence posts used in direct ground contact with no pre-treating of the wood.

Overall, aromatic red cedar is easy to work, notwithstanding any knots or irregularities present in the wood. It reportedly has a high silica content, which can dull cutters. Aromatic red cedar glues and finishes well, though in many applications, the wood is left unfinished to preserve its aromatic properties.

Cedar has a distinct and tell-tale scent: the wood is commonly used in closets and chests to repel moths and other insects. Though eastern red cedar trees are widely distributed throughout the eastern half of the United States, it is a very slow-growing species, and most trees harvested tend to be fairly small in diameter. Because of this, aromatic red cedar boards tend to be knotty and narrow.

In rustic or knotty grades of lumber, there will be a percentage of degrade during the milling process. Some knots may shake lose and/or fall out during the milling process. Mason’s Mill is not liable for these defects in moldings produced from knotty grades of lumber.

Mason’s Mill and Lumber will not be responsible or issue a credit for any cup, warp, twist or splitting that occurs in any custom cut Fir or Cedar boards or beams. These issues can be present in material cut from larger beams and timbers and need to be accounted for by the buyer when determining if Fir or Cedar is appropriate for the intended application.  Cedar and Fir products will typically have knots.

Ash is regularly used for furniture, flooring, doors, architectural millwork and moulding, kitchen cabinets, paneling, tool handles, baseball bats, hockey sticks, skis, oars and turnings. The sapwood is light-colored to nearly white and the heartwood varies from greyish or light brown, to pale yellow streaked with brown. The wood is generally straight-grained with a coarse uniform texture.

The degree and availability of light-colored sapwood, and other properties, will vary according to the growing regions.

CLICK HERE TO ORDER A $10.00 SAMPLE in your choice of species that will be credited towards your full order.

Cypress is a strong durable softwood used for structural work, especially suitable where the timber is in contact with the ground and for external work generally. Shipbuilding, farmhouse-style dining room furniture, linings for wardrobe doors and trunks are all popular uses for cypress.

CLICK HERE TO ORDER A $10.00 SAMPLE in your choice of species that will be credited towards your full order.

Douglas-fir has excellent strength properties and is well known for its workability. The wood dries rapidly with small dimensional movement and little tendency to check. It is relatively easy to work, with good machining qualities. It turns, planes and shapes well and can be sanded to a smooth finish.

CLICK HERE TO ORDER A $10.00 SAMPLE in your choice of species that will be credited towards your full order.

Our FEQ grade genuine mahogany is out of South America, commonly referred to as “Honduran mahogany".

Substitutes sometimes used are African mahogany or sipo mahogany, both of which are available in our rough lumber inventory.

CLICK HERE TO ORDER A $10.00 SAMPLE in your choice of species that will be credited towards your full order.

Our pattern grade genuine mahogany is out of South America and is commonly referred to as “Honduran mahogany”. The highest grade of mahogany available (virtually defect-free), this is selected for its straight grain and used for producing high quality, accurate patterns and models. These boards have been selected for their clarity and uniform grain, making them excellent for wood patterns that need to retain their perfect shape.

When used for cabinetry and furniture, the stability of pattern grade material is unmatched. The grain is very uniform and creates a beautifully uniform look across a large project like a big bookcase or even a kitchen.

CLICK HERE TO ORDER A $10.00 SAMPLE in your choice of species that will be credited towards your full order.

Padauk is easy to work and turns, glues, and finishes well. and has a good natural luster. Padauk has a very unique reddish orange coloration, and the wood is sometimes referred to by the name Vermillion. Padauk is moderately heavy, strong and stiff, with exceptional stability and has excellent decay resistance. Padauk is also reported to be resistant to termites and other insects. It is rated as durable to very durable.

Padauk is a popular hardwood among hobbyist woodworkers because of its unique color and low cost. Padauk is often used for veneer, flooring, turned objects, musical instruments, furniture, tool handles, and other small specialty wood objects. It is widely imported as lumber in a variety of lengths and thicknesses, as well as turning and craft blanks.

CLICK HERE TO ORDER A $10.00 SAMPLE in your choice of species that will be credited towards your full order.

Also known as White Pine or Moulding Pine, Ponderosa Pine is technically classified as a yellow (hard) pine, it shares many characteristics with white (soft) pines, having a considerably lower density than the yellow pine species found in the eastern United States. Ponderosa Pine has a wide, whitish to pale yellow sapwood, with a darker heartwood that is deep yellow to reddish-brown or orange-brown and is much heavier than the sapwood. The grain is typically straight and even, and is often characterized by many knots. Typical uses include rustic furniture, window frames, doors, kitchen furniture, building, boxes, dowels, cabinets, and general woodworking.

In rustic or knotty grades of lumber, there will be a percentage of degrade during the milling process. Some knots may shake lose and/or fall out during the milling process. Mason’s Mill is not liable for these defects in moldings produced from knotty grades of lumber.

Purpleheart wood is a deep purple-violet when freshly cut, maturing to a dark brown. and has a medium texture with good natural luster. The original color is restored when re-cut. Purpleheart is rated as being very durable, and resists both decay and most insect attacks, though it has been reported to be susceptible to attack from marine borers.

Common uses for purpleheart lumber include inlays and accent pieces, flooring, furniture, boatbuilding, heavy construction, and a variety of specialty wood items.

CLICK HERE TO ORDER A $10.00 SAMPLE in your choice of species that will be credited towards your full order.

Our sipo mahogany is an FEQ grade hardwood out of Africa. Sipo resembles very closely Honduras mahogany in color and appearance and a large percentage of boards will have pattern or straight grain.

Slightly denser than Honduras mahogany, sipo machines well and has little to no movement in service. It is extremely durable and used for the same applications as Honduras mahogany, including marine applications. Sipo is commonly used for furniture, cabinetry, turned objects, veneers, musical instruments, boat-building, and carving.

CLICK HERE TO ORDER A $10.00 SAMPLE in your choice of species that will be credited towards your full order.

Despite its name, Spanish cedar is not only a hardwood (and therefore not a Cedar), it is also not Spanish. Spanish cedar actually comes from the meliaceae family, along with mahogany. Spanish cedar is similar to genuine mahogany in its beautiful coloration, attractive grain pattern and great workability.

Spanish cedar grain is usually quite straight and works well with both hand and power tools. Spanish cedar is also known as "cigar-box cedar", as this was one of its traditional uses. The wood’s natural aroma repels insects, and the high resin count makes it very weather and rot resistant. Due to its low density, the lumber is quite lightweight, which makes this wood highly sought after as a high quality exterior grade species.

CLICK HERE TO ORDER A $10.00 SAMPLE in your choice of species that will be credited towards your full order.

Our teak is a true burmese FEQ grade that has exceptional stability and workability earning teak a legendary reputation in applications such as boat building, indoor and outdoor decking, outdoor furniture, and decorative trim.

The dark complexion and exquisite wood grain of teak make it a favorite among interior designers.

*Ask About Our S2S Plantation Teak*

CLICK HERE TO ORDER A $10.00 SAMPLE in your choice of species that will be credited towards your full order.

Thermally modified ash rough lumber offers the classic, timeless sophistication of real wood combined with the exceptional durability that results from the thermal modification process. When it comes to rot resistance and stability, this ash rough lumber will take on any other real wood product, including tropical woods and other modified hardwoods. Meticulous milling means clean lines, tight seams and easy installation.

The thermal wood process modifies each board completely, all the way through to the core, leading to unequalled durability and stability without sacrificing the natural qualities of real wood.

Ash is regularly used for furniture, flooring, doors, architectural millwork and moulding, kitchen cabinets, paneling, tool handles, baseball bats, hockey sticks, skis, oars and turnings. The sapwood is light-colored to nearly white and the heartwood varies from greyish or light brown, to pale yellow streaked with brown. The wood is generally straight-grained with a coarse uniform texture.

The degree and availability of light-colored sapwood, and other properties, will vary according to the growing regions.

• Extended Lifespan
• Rot Resistance

CLICK HERE TO ORDER A $10.00 SAMPLE in your choice of species that will be credited towards your full order.

Thermory® Benchmark Ash rough lumber offers the classic, timeless sophistication of real wood combined with the exceptional durability that results from a thermal modification process. When it comes to rot resistance and stability, this ash rough lumber will take on any other real wood product, including tropical woods and other modified hardwoods. Meticulous milling means clean lines, tight seams and easy installation.

The Thermory® wood process modifies each board completely, all the way through to the core, leading to unequalled durability and stability without sacrificing the natural qualities of real wood. To learn more about Thermory®, click HERE: https://www.youtube.com/watch?v=m_Z8FHs47HQ

• 25 Year + Lifespan
• Rot Resistance
• Thermally Modified Ash

CLICK HERE TO ORDER A $10.00 SAMPLE in your choice of species that will be credited towards your full order.

Our kiln dried western red cedar rough lumber can be milled into any of over 8000 milling profiles in our profile library or a custom made profile to match your specifications. Specified piece counts are available depending on the current stock at the time of order.

CLICK HERE TO ORDER A $10.00 SAMPLE that will be credited towards your full order.

Mason’s Mill and Lumber will not be responsible or issue a credit for any cup, warp, twist or splitting that occurs in any custom cut Fir or Cedar boards or beams. These issues can be present in material cut from larger beams and timbers and need to be accounted for by the buyer when determining if Fir or Cedar is appropriate for the intended application.  Cedar and Fir products will typically have knots.