Iron Woods® Vanish™ Rainscreen Siding
A New Elegance to the Art of Building Envelope Design
The perfect complement to the natural beauty of our Iron Woods® premium grade exterior building products and our existing line of siding profiles and standard rain screen offerings, the Vanish Rain™ Screen brings a newfound elegance to the art of both commercial and residential building envelope design and construction. Traditional horizontal rain screen siding has long been recommended for improved air flow allowing air to move vertically behind the siding and moisture to evaporate which significantly improves the service life of a building envelope and coating performance.
The Vanish™ Rain Screen System represents a significant leap forward in rain screen design and application. Our unique Vanish™ Rain Screen clips and Vanish™ siding profile provide not only both horizontal and vertical ventilation but also eliminate the appearance of fasteners from the building aesthetic which represents a significant improvement over traditional “on batten/face fastened” rain screen applications.
Stands Up to High Winds
Air flow improves pressure equalization in high wind environments.
Reduces Moisture
Vertical and horizontal air flow reduces moisture from the envelope and connection points while providing superior pressure equalization.
Compliant
Rainscreen siding is building and environmental code compliant.
Garapa Decking Kiln Dried
Garapa is a stable and durable exotic hardwood from Brazil that is naturally resistant to rot, decay and insect attack. Garapa is naturally scratch resistant which allows the surface to remain smooth for many years. Garapa is a wood that will out-perform pine, cedar, and other softer woods.
Garapa is a more affordable exotic hardwood for high end residential and commercial projects where more expensive woods like ipe are outside of budget limitations. Garapa has a fine textured grain very similar to ipe. Garapa also has a 25 year warranty against rot and decay.
Hardwood decking and products manufactured from hardwood decking are natural wood products, and as such will have natural variations in color and grain, including quarter sawn and plain sawn pieces. These variations are an accepted characteristic of these species and products, and are not considered a defect. All decking returns will be subject to a 15% restocking fee if the individual pieces are not found to be defective. Any acceptable returns must be in the exact same condition as when they were purchased.
Hardwood decking and products manufactured from hardwood decking are subject to possible movement in service including expansion and contraction. Some pieces with slight warp are possible as well. It is advised that proper installation techniques are followed to minimize the possible movement in service of these products. Mason’s Mill & Lumber is not responsible for any possible movement in service, as this is a natural characteristic of all wood.
Categories:
Decking,Hardwood
Sub-Categories:
In Stock:
Yes
Item#:
5802 - 1 x 6 x 8'
Item#:
5804 - 1 x 6 x 10'
Item#:
5806 - 1 x 6 x 12'
Item#:
5809 - 1 x 6 x 14'
Item#:
5811 - 1 x 6 x 16'
Item#:
5813 - 1 x 6 x 18'
Item#:
5815 - 1 x 6 x 20'
Item#:
5817 - 1 x 6 x 22' - ETA 1 week
Item#:
_____
Item#:
6375 - PROPLUG #8 SMART BIT (countersink with 3 drill bits)
Item#:
6376 - REPLACEMENT DRILL BITS (5) FOR PROPLUG SMARTBIT
Item#:
6381 - PROPLUG #8x2-1/2" SCREWS W/ 5/16" GARAPA PLUGS 350 PK
Quote
Vanish
- High profile clip / Low profile clip
- Vertical and horizontal air flow provides improved moisture evaporation and siding performance.
- Random butt joint location reduces siding trim waste and lowers material costs
- Marine grade aluminum clips for superior durability
- Wide clip design makes superior connections at butt joints.
- Unique three hole design for clip to batten, stud or sheathing fastening options.
- Profile stainless fasteners provide superior connection performance.
- Superior rain screening.
- Available in multiple wood species options
- Elimination of through face fastening
- Elimination of pre-drilling
- Reduced installation costs with or without the use of battens
- Vertical, horizontal or diagonal cladding application
- 4’’, 6’’ and 8’’ width profile option
Family owned & operated since 1989, Specializing in Custom Architectural Millwork, Green Building Materials, Hardwood Lumber Products, Plywood, Decking & Hardware.