Milled Lumber
The right cut is what turns a stack of lumber into finished work. Mason’s Mill runs S3S and S4S dimensional stock, custom profiles, slatwall, and moulding-grade runs across a deep species list — hardwoods, softwoods, and modified woods like Accoya® — surfaced to spec on our own equipment and quoted alongside the hardware and finish you need to install it.
Custom Milling, BuiltAround Your Project
Every project has a cut list the yard down the street can’t fill. A non-standard thickness. A one-off slatwall profile. A species the big-box stores don’t carry. Random-width S3S that has to yield efficiently against a specific board foot budget.
That is the work Mason’s Mill was built for. We surface hardwoods, softwoods, and modified woods to your exact dimensions — 1×2 through 1×12 in stock S4S, laminated wide stock, S3S random-width for maximum yield, and custom profiles milled to a drawing. Every run goes across our own moulders and surfacers, so tolerances, grain orientation, and finish quality are ours to own end-to-end.
Browse Our Milled Lumber
DeckWise® Deck Cleaner Parts 1/A & 2/B
Wood traps dirt, pollen and grime and when using exotic hardwood lumber it pays to maintain it. The Part 1 cleaner eliminates mildew, dirt, mold and stubborn stains. It also removes graying and reconditions Ipe, Tigerwood, Cumaru, Redwood, Cedar decking and outdoor wooden furniture or hardwood siding. Rejuvenate the rich color and distinct wood grain patterns and restore the all-natural lavish color before properly refinishing. The concentrated powders are developed to clean external hardwood decks, fences, hardwood siding, wood railings, benches, chairs and other outside wooden objects.
The Cleaner Part 1 is an oxygen rich wood cleaner that contains no bleach. When you follow the instructions on the Deck and Wood Cleaner label, the product is safe to use and will not damage wood, vegetation or lawn and is bio-degradable. Do not use a power washer on hardwood lumber which could leave scars and raise the wood grain. Always scrub with a non-metal brush. Wood cleansers can easily increase the pH level of lumber. Always follow cleaning with the DeckWise® Deck and Wood Brightener Part 2.
DeckWise® Deck Cleaner & Brightener Part 2 restores the pH level back a neutral state. It also removes tough rust and tannin stains caused by leaves, as well as mold and fungi stains while brightening the hardwood for finishing. It is recommended for use on most species of hardwood, including Redwood, Ipe, Cedar, Cumaru, Tigerwood and thermally modified softwoods. Brighten and restore the all-natural allure of outdoor wooden decking and rainscreen wood siding, outdoor furniture, hardwood fences, wood railings and steps. The goal of our product is to prepare the wood after cleaning and to eliminate the caustic affect from the Cleaner. The Brightener Part 2 is an oxygen-rich formula that contains the ingredient Oxalic Acid. It is a pH neutralizer and will re-establish the pH level to the wood.
Once the wood pH is neutral, the wood is ready to accept your choice of stain or oil finish more evenly and will certainly improve the beauty of the wood. We recommend our Ipe Oil Hardwood Oil Finish. The brightener also prepares new wood by stripping mill glaze. It can be used to eliminate rusty areas on concrete, brick and masonry as well. The Brightener Part 2 is a powder concentrate offered in 16 oz. jars. Mix at a 4:1 ratio with warm water. For tougher jobs, you may require several applications or a more powerful mixture.
Quote
What You'll Find on the Shelf
A working milled-lumber inventory for cabinet shops, custom builders, millwork specifiers, and finish carpenters:
S4S Stock Hardwoods
Alder, Knotty Alder, Cherry, Hard Maple, and Cypress surfaced, sanded, and straight on all four sides. Available 1 x 4 through 1 x 12, with laminated 1 x 12 in Alder and Knotty Alder for wide-panel work. Ready for cabinetry, furniture, trim, and one-off shop projects.
S3S Hardwoods
Alder, Knotty Alder, Cherry, and Hard Maple in random-width, surfaced-3-sides stock with two smooth faces and one straight edge. Built for maximum yield on cut-list-driven runs where board foot economy matters.
Modified & Sustainable Woods
Accoya® S4S decking, acetylated softwood carrying a 50-year above-ground and 25-year in-ground / freshwater guarantee. No additional oil or finish is required to hit those numbers, and it mills cleanly for custom rainscreen, cladding, and exterior trim profiles.
Custom Profiles & Slatwall
MC-1715, MC-3237, and MC-5850 slatwall profiles milled to specification in the species of your choice, plus custom moulding and cladding runs from our profile library or your drawing.
Specialty & Rustic Stock
Including Forever Barnwood reversible shiplap — 100-year-old weathered knotty white pine with a reversible weathered / circle-sawn face for accent walls, ceilings, and rustic feature work.
Milled Lumber That Pairs With the Rest of the Job
We built the milling program around the projects we already supply. That means the S4S stock, S3S random-width, and custom profiles on our rack are the same ones we quote alongside your hardware package from Blum®, King Slide®, or CGS, your CUTEK® finish system, and your Thermory® or Accoya® exterior wood package.
Send us the cut list, the drawing, or the sample. We’ll match species, mill to spec, and bundle lumber, hardware, and finish into one quote — one point of contact, one delivery, one invoice.
Frequently Asked Questions
S4S ("surfaced four sides") is dimensional stock — sanded smooth and straight on all four sides in fixed widths (1 x 4, 1 x 6, 1 x 8, 1 x 12) and ready to go straight into cabinets, furniture, and trim. S3S ("surfaced three sides") is random-width lumber with two smooth faces and one straight edge, sold for maximum yield on a specific cut list. If you're building to standard nominal sizes, order S4S. If you're ripping to a custom width or optimizing board foot cost, order S3S.
Alder, Knotty Alder, Cherry, Cypress, and Hard Maple are stocked as dimensional S4S in 1 x 4, 1 x 6, 1 x 8, and 1 x 12. Alder and Knotty Alder 1 x 12 are laminated wide stock. Additional species can be milled to order — send us the cut list and we'll quote it.
Yes. In addition to our library of stock profiles — including the MC-1715, MC-3237, and MC-5850 slatwall profiles — we run custom moulding, cladding, and slatwall profiles to specification in the species of your choice. Send the drawing or a sample and we'll match it on our moulders.
Accoya® is acetylated softwood — chemically modified so the cell structure no longer absorbs water the way untreated wood does. That gives it a 50-year above-ground and 25-year in-ground / freshwater guarantee, and it doesn't require an oil or finish to hit those numbers. We stock Accoya® as S4S decking and can mill it to custom profiles for rainscreen, cladding, and exterior trim.
Rustic and knotty grades — Knotty Alder, Forever Barnwood, and similar — contain tight, sound knots throughout the boards, which is part of the look. Some knots may shake loose or fall out during the milling process, and Mason's Mill is not liable for those defects in mouldings produced from knotty grades. Order clear grades (Superior Alder, Select & Better Cherry, S&B 1&2 Hard Maple) when you need a knot-free run.
Yes. Most species and profiles are available as $10 samples, and the sample fee is credited back against your full order. It's the fastest way to confirm grain, color, and profile before we cut a job to size.
Both. We work with architects, builders, cabinet shops, and contractors on trade terms, and we're also open to homeowners buying for their own projects. Trade accounts get pricing tiers and dedicated contact support — reach out if you'd like to set one up.
Yes, and we recommend it. Bundling milled lumber with Blum®, King Slide®, or CGS hardware, CUTEK® finishes, and Thermory® or Accoya® decking means one point of contact, one delivery, and one invoice — the same way we already handle M3 Custom Millwork Shop projects.
Use the Request a Quote button on this page, call your Mason's Mill contact, or stop by the yard. Include the species, dimension, quantity, and profile (or attach a drawing). If you're not sure yet, describe the project and we'll do the spec work.