Milled Lumber
The right cut is what turns a stack of lumber into finished work. Mason’s Mill runs S3S and S4S dimensional stock, custom profiles, slatwall, and moulding-grade runs across a deep species list — hardwoods, softwoods, and modified woods like Accoya® — surfaced to spec on our own equipment and quoted alongside the hardware and finish you need to install it.
Custom Milling, BuiltAround Your Project
Every project has a cut list the yard down the street can’t fill. A non-standard thickness. A one-off slatwall profile. A species the big-box stores don’t carry. Random-width S3S that has to yield efficiently against a specific board foot budget.
That is the work Mason’s Mill was built for. We surface hardwoods, softwoods, and modified woods to your exact dimensions — 1×2 through 1×12 in stock S4S, laminated wide stock, S3S random-width for maximum yield, and custom profiles milled to a drawing. Every run goes across our own moulders and surfacers, so tolerances, grain orientation, and finish quality are ours to own end-to-end.
Browse Our Milled Lumber
Garapa Decking Kiln Dried
Garapa is a stable and durable exotic hardwood from Brazil that is naturally resistant to rot, decay and insect attack. Garapa is naturally scratch resistant which allows the surface to remain smooth for many years. Garapa is a wood that will out-perform pine, cedar, and other softer woods.
Garapa is a more affordable exotic hardwood for high end residential and commercial projects where more expensive woods like ipe are outside of budget limitations. Garapa has a fine textured grain very similar to ipe. Garapa also has a 25 year warranty against rot and decay.
Hardwood decking and products manufactured from hardwood decking are natural wood products, and as such will have natural variations in color and grain, including quarter sawn and plain sawn pieces. These variations are an accepted characteristic of these species and products, and are not considered a defect. All decking returns will be subject to a 15% restocking fee if the individual pieces are not found to be defective. Any acceptable returns must be in the exact same condition as when they were purchased.
Hardwood decking and products manufactured from hardwood decking are subject to possible movement in service including expansion and contraction. Some pieces with slight warp are possible as well. It is advised that proper installation techniques are followed to minimize the possible movement in service of these products. Mason’s Mill & Lumber is not responsible for any possible movement in service, as this is a natural characteristic of all wood.
Quote
What You'll Find on the Shelf
A working milled-lumber inventory for cabinet shops, custom builders, millwork specifiers, and finish carpenters:
S4S Stock Hardwoods
Alder, Knotty Alder, Cherry, Hard Maple, and Cypress surfaced, sanded, and straight on all four sides. Available 1 x 4 through 1 x 12, with laminated 1 x 12 in Alder and Knotty Alder for wide-panel work. Ready for cabinetry, furniture, trim, and one-off shop projects.
S3S Hardwoods
Alder, Knotty Alder, Cherry, and Hard Maple in random-width, surfaced-3-sides stock with two smooth faces and one straight edge. Built for maximum yield on cut-list-driven runs where board foot economy matters.
Modified & Sustainable Woods
Accoya® S4S decking, acetylated softwood carrying a 50-year above-ground and 25-year in-ground / freshwater guarantee. No additional oil or finish is required to hit those numbers, and it mills cleanly for custom rainscreen, cladding, and exterior trim profiles.
Custom Profiles & Slatwall
MC-1715, MC-3237, and MC-5850 slatwall profiles milled to specification in the species of your choice, plus custom moulding and cladding runs from our profile library or your drawing.
Specialty & Rustic Stock
Including Forever Barnwood reversible shiplap — 100-year-old weathered knotty white pine with a reversible weathered / circle-sawn face for accent walls, ceilings, and rustic feature work.
Milled Lumber That Pairs With the Rest of the Job
We built the milling program around the projects we already supply. That means the S4S stock, S3S random-width, and custom profiles on our rack are the same ones we quote alongside your hardware package from Blum®, King Slide®, or CGS, your CUTEK® finish system, and your Thermory® or Accoya® exterior wood package.
Send us the cut list, the drawing, or the sample. We’ll match species, mill to spec, and bundle lumber, hardware, and finish into one quote — one point of contact, one delivery, one invoice.
Frequently Asked Questions
S4S ("surfaced four sides") is dimensional stock — sanded smooth and straight on all four sides in fixed widths (1 x 4, 1 x 6, 1 x 8, 1 x 12) and ready to go straight into cabinets, furniture, and trim. S3S ("surfaced three sides") is random-width lumber with two smooth faces and one straight edge, sold for maximum yield on a specific cut list. If you're building to standard nominal sizes, order S4S. If you're ripping to a custom width or optimizing board foot cost, order S3S.
Alder, Knotty Alder, Cherry, Cypress, and Hard Maple are stocked as dimensional S4S in 1 x 4, 1 x 6, 1 x 8, and 1 x 12. Alder and Knotty Alder 1 x 12 are laminated wide stock. Additional species can be milled to order — send us the cut list and we'll quote it.
Yes. In addition to our library of stock profiles — including the MC-1715, MC-3237, and MC-5850 slatwall profiles — we run custom moulding, cladding, and slatwall profiles to specification in the species of your choice. Send the drawing or a sample and we'll match it on our moulders.
Accoya® is acetylated softwood — chemically modified so the cell structure no longer absorbs water the way untreated wood does. That gives it a 50-year above-ground and 25-year in-ground / freshwater guarantee, and it doesn't require an oil or finish to hit those numbers. We stock Accoya® as S4S decking and can mill it to custom profiles for rainscreen, cladding, and exterior trim.
Rustic and knotty grades — Knotty Alder, Forever Barnwood, and similar — contain tight, sound knots throughout the boards, which is part of the look. Some knots may shake loose or fall out during the milling process, and Mason's Mill is not liable for those defects in mouldings produced from knotty grades. Order clear grades (Superior Alder, Select & Better Cherry, S&B 1&2 Hard Maple) when you need a knot-free run.
Yes. Most species and profiles are available as $10 samples, and the sample fee is credited back against your full order. It's the fastest way to confirm grain, color, and profile before we cut a job to size.
Both. We work with architects, builders, cabinet shops, and contractors on trade terms, and we're also open to homeowners buying for their own projects. Trade accounts get pricing tiers and dedicated contact support — reach out if you'd like to set one up.
Yes, and we recommend it. Bundling milled lumber with Blum®, King Slide®, or CGS hardware, CUTEK® finishes, and Thermory® or Accoya® decking means one point of contact, one delivery, and one invoice — the same way we already handle M3 Custom Millwork Shop projects.
Use the Request a Quote button on this page, call your Mason's Mill contact, or stop by the yard. Include the species, dimension, quantity, and profile (or attach a drawing). If you're not sure yet, describe the project and we'll do the spec work.