Call Us Today!
Plywood
Our plywood inventory supports builders and cabinetry makers with dependable stock, clean faces, and flexible core options. Standard panels, custom layups, and specialty sheet goods—sourced to meet the demands of construction and production environments.
Plywood & Sheet Goods
At Mason’s Mill & Lumber, plywood isn’t an afterthought — it’s a working material. We stock and source sheet goods that builders and cabinetry makers rely on every day, with the consistency, face quality, and core options required for real jobsite and shop conditions.
From domestic NAUF and ULEF panels to specialty outdoor and moisture-resistant options, our inventory is built to support production schedules, not slow them down.
Custom Layups& Specialty Sheet Goods
For projects that need more than an off-the-rack panel, we offer custom plywood solutions through our sourcing and manufacturing partners.
Custom capabilities include:
Custom veneer layups
Different faces on each side (species-to-species or veneer to melamine)
Pre-finished custom panels
Cut-to-size options (within project scope)
- UV finishing
These solutions are typically handled job-by-job, allowing builders and cabinet shops to dial in exactly what the project requires — without over-ordering or unnecessary compromises.
If your project needs something specific, our team can help spec the panel before it ever shows up onsite.
Browse our Plywood Selection
DeckWise® Deck Cleaner Parts 1/A & 2/B
Wood traps dirt, pollen and grime and when using exotic hardwood lumber it pays to maintain it. The Part 1 cleaner eliminates mildew, dirt, mold and stubborn stains. It also removes graying and reconditions Ipe, Tigerwood, Cumaru, Redwood, Cedar decking and outdoor wooden furniture or hardwood siding. Rejuvenate the rich color and distinct wood grain patterns and restore the all-natural lavish color before properly refinishing. The concentrated powders are developed to clean external hardwood decks, fences, hardwood siding, wood railings, benches, chairs and other outside wooden objects.
The Cleaner Part 1 is an oxygen rich wood cleaner that contains no bleach. When you follow the instructions on the Deck and Wood Cleaner label, the product is safe to use and will not damage wood, vegetation or lawn and is bio-degradable. Do not use a power washer on hardwood lumber which could leave scars and raise the wood grain. Always scrub with a non-metal brush. Wood cleansers can easily increase the pH level of lumber. Always follow cleaning with the DeckWise® Deck and Wood Brightener Part 2.
DeckWise® Deck Cleaner & Brightener Part 2 restores the pH level back a neutral state. It also removes tough rust and tannin stains caused by leaves, as well as mold and fungi stains while brightening the hardwood for finishing. It is recommended for use on most species of hardwood, including Redwood, Ipe, Cedar, Cumaru, Tigerwood and thermally modified softwoods. Brighten and restore the all-natural allure of outdoor wooden decking and rainscreen wood siding, outdoor furniture, hardwood fences, wood railings and steps. The goal of our product is to prepare the wood after cleaning and to eliminate the caustic affect from the Cleaner. The Brightener Part 2 is an oxygen-rich formula that contains the ingredient Oxalic Acid. It is a pH neutralizer and will re-establish the pH level to the wood.
Once the wood pH is neutral, the wood is ready to accept your choice of stain or oil finish more evenly and will certainly improve the beauty of the wood. We recommend our Ipe Oil Hardwood Oil Finish. The brightener also prepares new wood by stripping mill glaze. It can be used to eliminate rusty areas on concrete, brick and masonry as well. The Brightener Part 2 is a powder concentrate offered in 16 oz. jars. Mix at a 4:1 ratio with warm water. For tougher jobs, you may require several applications or a more powerful mixture.
Quote
Extensive Inventory, Ready to Work
We offer a deep selection of domestic and imported plywood, available in a wide range of species, cores, and thicknesses — typically from 1/4″ through 1″, with larger and specialty thicknesses available by request.
Available options include:
NAUF panels
ULEF certified plywood
MDF core and combination core stain-grade panels
MDF sheets from 1/4″ to 1-1/8″
MDO for exterior and formwork applications
Every product we stock is selected with flatness, consistency, and finish quality in mind — the things that matter once the sheet hits the saw or goes on the wall.
Frequently Asked Questions
We carry a wide range of domestic and imported plywood, including NAUF panels, ULEF-certified plywood, MDF core, combination core, MDO, and specialty sheet goods. Thicknesses typically range from 1/4″ to 1″, with additional options available by request.
Yes. We can source custom plywood layups on a project-by-project basis. Options include custom veneers, different faces on each side, melamine on one face with wood veneer on the other, and pre-finished panels depending on project requirements.
Cut-to-size services are available within reason and are typically handled as part of a larger project or custom order. Our team can help determine what makes sense based on your application and timeline.
For exterior and moisture-exposed applications, we stock MDO panels, Tricoya™ waterproof MDF with a 50-year rot warranty, and Modern Mill ACRE™ sheet goods designed for durability and long-term performance outdoors.
Our plywood and sheet goods are primarily used by builders, cabinetry shops, and millwork professionals working in residential and commercial construction. We focus on materials that perform well in jobsite and shop environments where consistency and availability matter.
Start your next Plywood Project with Mason's Mill today!
Let’s Spec It Right Whether you need stocked panels, a custom layup,
or help selecting the right sheet good for the job, our team is here to help.