Our plywood inventory supports builders and cabinetry makers with dependable stock, clean faces, and flexible core options. Standard panels, custom layups, and specialty sheet goods—sourced to meet the demands of construction and production environments.
At Mason’s Mill & Lumber, plywood isn’t an afterthought — it’s a working material. We stock and source sheet goods that builders and cabinetry makers rely on every day, with the consistency, face quality, and core options required for real jobsite and shop conditions.
From domestic NAUF and ULEF panels to specialty outdoor and moisture-resistant options, our inventory is built to support production schedules, not slow them down.
For projects that need more than an off-the-rack panel, we offer custom plywood solutions through our sourcing and manufacturing partners.
Custom capabilities include:
Custom veneer layups
Different faces on each side (species-to-species or veneer to melamine)
Pre-finished custom panels
Cut-to-size options (within project scope)
These solutions are typically handled job-by-job, allowing builders and cabinet shops to dial in exactly what the project requires — without over-ordering or unnecessary compromises.
If your project needs something specific, our team can help spec the panel before it ever shows up onsite.
Tambour panels are solid hardwood slat panels mounted on a flexible backing, which lets a single panel wrap curves, columns, and outside corners that rigid paneling cannot reach. White River mills its tambour in Fayetteville, Arkansas from North American hardwoods and ships it unfinished, ready for any paint or stain. It is the most specified architectural wall panel in the White River catalog - used on kitchen island waterfalls, curved reception desks, cabinetry faces, and full feature walls.
Companion product: Solid Wood Paneling (SWP) is tongue-and-groove hardwood paneling, 11/16 in. thick, and every SWP profile corresponds directly to a tambour style. Run SWP on the flat walls and tambour on the curves in the same room - same profile, same species, same finish, no visible transition.
PRODUCT FEATURES & DETAILS
19 profiles across four families - Bead, Bevel, Square, Cove-Cut
Bead styles: 100, 101, 102, 103, 104, 105, 106, 107, 110
Bevel styles: 201, 202, 203, 204, 206, 207
Square styles: 302, 304 | Cove-Cut styles: 402, 403
Panel sizes: 12 in. x 96 in. and 12 in. x 48 in.; select styles also 24 in. x 48 in.
Species: Red Oak, Hard Maple, Poplar, White Oak, Walnut
Flexible backing wraps curves, columns, and corners
Ships unfinished; accepts stain or paint
Custom panels to spec, up to 120 in. wide
Lead time 7-10 business days
SKU format is style number + panel size (e.g. TM100-1296, TM100-1248, TM100-2448)
Manufactured in the USA
NOTES
NOT suitable for wet or high-humidity environments including showers, bathrooms, or pools.
Allow 24-48 hours acclimation before finishing or installing.
Warranty may be voided by installation in high-moisture environments, or if cabinetry or furniture is mounted through the tambour panel into the wall.
Follow the adhesive manufacturer instructions.
Learn more: https://whiteriver.com/collections/solid-wood-tambour-panel-collection
We offer a deep selection of domestic and imported plywood, available in a wide range of species, cores, and thicknesses — typically from 1/4″ through 1″, with larger and specialty thicknesses available by request.
Available options include:
NAUF panels
ULEF certified plywood
MDF core and combination core stain-grade panels
MDF sheets from 1/4″ to 1-1/8″
MDO for exterior and formwork applications
Every product we stock is selected with flatness, consistency, and finish quality in mind — the things that matter once the sheet hits the saw or goes on the wall.
We carry a wide range of domestic and imported plywood, including NAUF panels, ULEF-certified plywood, MDF core, combination core, MDO, and specialty sheet goods. Thicknesses typically range from 1/4″ to 1″, with additional options available by request.
Yes. We can source custom plywood layups on a project-by-project basis. Options include custom veneers, different faces on each side, melamine on one face with wood veneer on the other, and pre-finished panels depending on project requirements.
Cut-to-size services are available within reason and are typically handled as part of a larger project or custom order. Our team can help determine what makes sense based on your application and timeline.
For exterior and moisture-exposed applications, we stock MDO panels, Tricoya™ waterproof MDF with a 50-year rot warranty, and Modern Mill ACRE™ sheet goods designed for durability and long-term performance outdoors.
Our plywood and sheet goods are primarily used by builders, cabinetry shops, and millwork professionals working in residential and commercial construction. We focus on materials that perform well in jobsite and shop environments where consistency and availability matter.
Let’s Spec It Right Whether you need stocked panels, a custom layup,
or help selecting the right sheet good for the job, our team is here to help.
