S2S Milled Lumber
S2S (Surfaced Two Sides) milled lumber is precision-planed on the top and bottom, providing a smooth, uniform surface that’s ready for further processing or immediate use. Ideal for projects requiring consistent thickness and a clean finish, S2S lumber saves you time and effort in preparation. Choose from a variety of wood species and dimensions, all expertly milled to meet your project needs.
Vertical Grain Pine — Cutek Extreme Clear Finish
Vertical Grain (VG) Pine is a premium cut of pine milled specifically so that the growth rings run perpendicular to the face of the board — typically at 60° to 90° to the surface. This "quartersawn" or "rift-sawn" orientation produces a board with a tight, straight, pinstripe-like grain pattern that is dramatically more stable and refined than standard flat-sawn (plain-sawn) pine. Because the growth rings are oriented vertically, VG boards resist the cupping, twisting, and cathedral-pattern grain shifts that flat-sawn lumber is prone to, and they wear more evenly over time — which is why vertical grain has been the traditional choice for high-end architectural applications like porch flooring, exterior siding, boat decks, and fine millwork.
The visual character of VG Pine is one of its biggest selling points: consistent, linear grain lines with minimal figure or knots, producing a clean, understated appearance that reads as more formal and architectural than character-grade pine. This makes it particularly well-suited to applications where the wood is a design feature rather than a background material — traditional porch ceilings, Craftsman and coastal-style siding, wainscoting, and interior paneling.
Each board is finished with Cutek Extreme Clear, a penetrating oil engineered to stabilize exterior wood from the inside out. Rather than forming a surface film like paint or varnish, Cutek carries its oils deep into the wood fibers, where they work continuously to slow moisture movement — the primary driver of cupping, checking, and end-splitting. This is especially valuable for pine, which is more naturally susceptible to moisture-related movement than denser hardwoods; Cutek's stabilizing action significantly extends the board's dimensional life outdoors. Because the finish penetrates rather than coats, it cannot peel or flake, and maintenance requires no sanding or stripping — just clean the surface and reapply when it looks dry. The clear formulation adds no pigment, allowing the natural honey-gold tone of the pine to show through initially before gradually silvering to a soft gray patina if left unmaintained with a colortone.
Ideal for porch ceilings, tongue-and-groove soffits, traditional lap or shiplap siding, wainscoting, interior paneling, and any application where a refined, straight-grained wood aesthetic is desired.
Specifications
| Spec | Detail |
|---|---|
| Species | Pine (typically Southern Yellow Pine, White Pine, or Radiata Pine depending on source) |
| Cut | Vertical Grain (VG) — quartersawn / rift-sawn |
| Grain Orientation | Growth rings at 60°–90° to the face; tight, straight, linear grain pattern |
| Grade | Clear or C & Better — minimal knots, uniform appearance |
| Finish | Cutek Extreme Clear (penetrating oil) |
| Finish Type | Oil-based, non-film-forming |
| Color | Natural honey-gold to warm amber (weathers to silver-gray if not maintained with colortone) |
| Janka Hardness | ~380–870 lbf depending on pine species |
| Dimensional Stability | Superior to flat-sawn pine — VG cut significantly reduces cupping, twisting, and radial movement |
| Wear Characteristics | Wears more evenly than flat-sawn; ideal for high-traffic and high-visibility applications |
| Applications | Porch ceilings, soffits, T&G siding, wainscoting, interior paneling, fine millwork, traditional and coastal architecture |
| Maintenance | Clean and re-oil with Cutek Extreme as needed — no sanding or stripping required |
| Fixings | Stainless steel or hot-dipped galvanized fasteners recommended for exterior applications |
| Sustainability | Sourced from managed pine forests; FSC-certified options available |
